MAIN MENU
You can enter this menu pressing PROG button for 5 seconds.
The menu has the following parameters:
PAYMENT SYSTEM
Setting the payment system and its options.
SET TEMPERATURE
Setting temperatures and other boilers functions
OPTIONS: INSERT PASSWORD
You can enter the options menu with 2 programming levels: operator and technician or manager.
REGULAR MODE COUNTERS&AMOUNTS: regular mode counter.
TEST MODE COUNTERS&AMOUNTS: test mode working counter.
FREE MODE COUNTERS&AMOUNTS: free mode working counter.
RESET COUNTERS&AMOUNTS: Above counters zero resetting. Press “6” to confirm or “5” to cancel.
ENABLE SLAVE MACHINE: Enabling the “slave” machine is not available.
ENABLE TEMPERAT.ON DISPLAY: Visualization of the boiler temperature on the display.
SERIAL NUMBER: Machine serial number.
CAUTION ! OUTPUT TEST !: board electrical output test (see the chart on page 20).
TYPE OF MACHINE: Machine model (please refer to the manufacturer before changing it).
ENABLE AUTOMATIC WASHING: if enabled, the machine makes an auto- matic washing cycle at the
DISPLAY COUNTERS ENABLE: if enabled, at the
BOILER 1 WORKING: Boiler enabling.
Note 1: In order to avoid mixing group blocking, the software controls the powder and water values as the following diagram shows:
Pag. 14 | Pag. 19 |
