La Pavoni P180 manual Payment System

OPTIONS: LEVEL 2 (manager- technician)

After you have inserted the correct password, which initially is “222”, the follow- ing menu will appear:

MODIFY PASSWORD LEVEL 1: Insert the new password and press E to con- firm.

MODIFY PASSWORD LEVEL 2: Insert the new password and press E to con- firm.

SET DRINKS: See ”set drinks” chapter on page 21.

LOAD DEFAULT DATA: Original data loading. Press “6” to confirm or pr ess “5” to cancel it.

SET LANGUAGE: Language of all the messages.

SET DELAY POWDER: Time between the water and the powder supply, in second tenths (see note 1).

SET WATER QUEUE: Water reserve without powder at the end of the selection in second tenths (see note 1).

SET PAUSE ESPRESSO GROUP: Time for coffee ground drying, in second tenths.

ENABLE BITTER DRINK AS DEFAULT: Function of sugar’s selections.

If ENABLE, the drink will be without sugar and the buttons A and B will have the function of “sweet” and “extra sweet” resp ectively.

If DISABLED, the drink will be with sugar and the buttons A and B will have the function of “no sugar” and “extra sweet” r espectively.

PRE-GRINDING: pre-grinding function enabling

SET FILTER COUNTER: Counter for the message of anti-scale filter replacing. Once reached, the machine will show “*” on display but it will keep on working (see also on page 18).

SET NUMBER OF COFFEE GROUNDS: Counter for the message of coffee grounds emptying. Once reached, the machine will show “EMPTY GROUNDS” and it will stop (see also on page 24).

PAYMENT SYSTEM

This menu has the following parameters:

SET COIN VALUE PARALLEL SYSTEM

Setting the coin values (see note 1).

DECIMAL POINT

Setting the decimal point of coins and prices values.

NAME OF CURRENCY

Setting the currency name.

SINGLE SALE NO CHANGE GIVEN

Setting the sale mode without keeping the residual credit.

MAXIMUM CHANGE GIVEN

Change maximum value ( only for MDB change giver systems).

TYPE OF PAYMENT SYSTEM

Payment system used in the machine (see note 2).

Note 1: This menu is only valid for parallel acceptors.

If you want to memorize the coin values proceed in the following way: set the coin value with the numerical buttons

insert the coin in the acceptor

if the coin is accepted, the display will show the channel on which is programmed

press F4 to confirm the memorization. Repeat the procedure for the other coins.

Note 2: After programming the type of payment system, you have to go out of the program with ESC and switch off the machine.

To use MDB payment systems, insert the red wire into the connector of the elec- tronic board.

Pag. 18 Pag. 15