LaCie d2 Quadra • Design by Neil Poulton | Introduction |
User Manual | page 11 |
|
|
1.5. Hard Disk Heat Management
Heat Dissipation Design
The LaCie d2 Quadra’s metal body is ideal for naturally dissi- pating internal drive heat. Its unique design actually draws heat away from the internal drive toward the external casing. The large surface area of the heat sink casing absorbs internal heat and dissipates it, keeping the drive safe and prolonging its life and reli- ability. As a consequence, it is normal that the external casing is warm to the touch. Please make sure that the vent on the
Upright, Stack & Rackmount Configuration
Heat dissipation is maximized when the d2 Quadra is in the upright position. When stacking LaCie d2 Quadras, please remember to attach the included rubber feet on the under side of your drives. This will allow for some airflow between your drives so that the heat dissipation can work effectively. LaCie does not recommend stack- ing or racking more than three d2 drives on top of each other, especially if these drives are turned on simultaneously.
Exclusive d2 Heat Sink Design
Provides 60% more area for heat dissipation
Heat Sink |
| Standard |
| |
Design |
| Design |
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
