LaCie d2 Quadra • Design by Neil Poulton

Getting Connected

User Manual

page 14

 

 

2.2. Connecting the Interface Cable

Important Info: Please connect the power supply be- fore connecting the interface cable to ensure that the volume mounts correctly on your computer.

To connect the interface cable:

1.Connect one end of the interface cable (USB, FireWire 400, FireWire 800 or eSATA) to your computer.

2.Connect the other end of the interface cable to the matching port on the LaCie hard disk (Fig. 2.2).

3.After a few seconds, a small LaCie parition will mount on your computer and appear in My Computer (Windows users)

or on your desktop (Mac users).

4.Proceed to section 2.3. Launching LaCie Setup Assistant.

Figure 2.2

FireWire 400

FireWire 800

FireWire 800

USB 2.0

eSATA

Power Supply

Page 15
Image 15
LaCie FireWire 800 user manual Connecting the Interface Cable, To connect the interface cable, Or on your desktop Mac users