LaCie Rugged Hard Disk user manual Ating system support Hi-Speed USB 2.0? Drive turns on

LaCie Rugged Hard Disk • Design by Neil Poulton			Troubleshooting
User Manual			page 25
	Problem	Question	Solution
	The drive is not running	Is the drive connected to a	If your drive is connected to a USB port or hub, this is normal. A
	noticeably faster when	USB port on your computer, or	Hi-Speed USB 2.0 device can only operate at Hi-Speed USB 2.0
	connected via Hi-Speed	to a USB hub?	performance levels when it is connected directly to a Hi-Speed USB
	USB 2.0.		2.0 port or hub. Otherwise, the Hi-Speed USB 2.0 device will operate
			at the slower USB transfer rates.
		Is the drive connected to a Hi-	Check to see that the Hi-Speed USB 2.0 drivers for both your host bus
		Speed USB 2.0 port on your	adapter and device have been installed correctly. If in doubt, un-install
		computer?	the drivers and re-install them.
		Does your computer or oper-	See section 1.2. Minimum System Requirements.
		ating system support Hi-Speed
		USB 2.0?
	The drive turns on and	This is normal. Your drive has an autoswitching power feature, which means that if your drive is con-
	off when you turn your	nected to your computer, turning the computer on will automatically turn the drive on. Likewise, turning
	computer on and off (USB	the computer off will automatically turn the drive off.
	and FireWire connec-
	tions).