Land Pride

Section 2: Adjustments

Table of Contents

Cutting Height Adjustment

!DANGER!

Engage parking brake, disengage PTO, shut off tractor and remove key before proceeding. Ensure that all moving parts have come to a complete stop before dismounting from the tractor.

!CAUTION!

Wear a pair of gloves when performing this operation. Go to the back of the cutter and carefully rotate each blade to the position shown in Figure 2-3. Avoid direct contact with the cutting edge of the blade.

Refer to Figure 2-3:

Measure distance from cutting tip of the front cutting blade to ground surface. This distance is the cutting height.

Lift-Type Cutter

Refer to Figure 2-4:

Adjust the tailwheel if cutting height is too high or too low.

1.Use tractor’s 3-point hydraulic control to lift cutter so that the tailwheel clears the ground.

2.Remove existing hardware; 1/2” -13 x 1 1/2" long carriage bolt (#1) and 1/2” flange nut (#2).

3.Adjust tailwheel up or down to desired cutting height by repositioning adjusting plate (#3) and then replacing the hardware.

22316

Cutting Height

Figure 2-3

16269

4.Tighten 1/2” flange nut (#2) to the correct torque. Refer to “Torque Values Chart for Common Bolt Sizes” on page 38.

Pull-Type Cutter

Refer to Figure 2-5:

Lift mechanism for pull-type units can be equipped with either a ratchet jack (#1) or hydraulic cylinder (#2). Adjust lifting mechanism if cutting height is too high or too low.

Ratchet Jack Instructions

The deck can be raised or lowered by setting the ratchet mechanism on the ratchet jack (#1) and then pumping the jack handle to raise or lower the cutter to desired cutting height.

Hydraulic cylinder Instructions

Stroke control spacers (#3) are included with the hydraulic set-up. They consist of cast steel halves with spring clips to hold the two halves together.

1.Extend the hydraulic cylinder to free up space on the cylinder rod for installing and removing spacers. Add or remove spacers as needed.

2.Retract hydraulic cylinder and re-measure to verify if cutting height is suitable.

3.Store stroke control spacers on hydraulic hose (#4) near the hydraulic cylinder.

3-Point Cutter Height Adjustment

Figure 2-4

22318

Pull-Type Lift Selections

Figure 2-5

5/09/08

RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M

23

Page 24 Page 26
Page 25
Image 25
Land Pride RCR2596, 312-753M, RCRM2510 Cutting Height Adjustment, Point Cutter Height Adjustment, Pull-Type Lift Selections
Page 24 Page 26

312-753M, RCR2510, RCRM2510, RCR2596 specifications

Land Pride, a leading manufacturer of agricultural and landscaping equipment, has established a strong reputation for producing innovative and durable products. Among their diverse range of offerings are the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 models, each engineered with specific features to cater to various land management and maintenance tasks.

The Land Pride 312-753M is an advanced grooming mower designed for meticulous finishing work in landscape applications. With a cutting width of 75 inches, it is suitable for a range of tasks from mowing parks to maintaining golf course fairways. Its floating deck design allows for optimal contour following, ensuring a clean cut even on uneven terrain. The mower features a robust construction with reinforced edges that enhance durability, and the blade tip speed maximizes cutting efficiency.

Next in the lineup, the RCR2596 rotary cutter is engineered for heavy-duty mowing, making it ideal for clearing tall grass and brush in fields and pastures. With a 96-inch cut width, the RCR2596 boasts a rugged design that can handle various terrains and dense vegetation. Its heavy-duty gearboxes and cutting blades are built to last, providing operators with peace of mind during extensive operations. The RCR2596 also includes a side skirt that improves safety by containing debris while mowing.

The RCRM2510 is a robust rotary cutter that combines performance with efficiency. Designed for smaller tractors, it features a 10-foot cutting width, making it an excellent choice for tasks demanding precision and power. The RCRM2510 incorporates a fully adjustable hitch that allows for easy attachment to various tractor models. Additionally, its floating design permits it to follow the contours of the land, optimizing its cutting capabilities across diverse landscapes.

Lastly, the RCR2510 model is another addition to the rotary cutter series, renowned for its versatile applications. With a cutting width of 10 feet, it is perfect for managing overgrown fields, pastures, and large landscaped areas. The RCR2510 features heavy-duty construction intended to withstand challenging conditions, ensuring longevity and reliability. Its user-friendly design facilitates easy maintenance, and the premium blades deliver exceptional cutting performance.

In summary, the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 rotary cutters offer exceptional capabilities tailored to meet the needs of both professional landscapers and agricultural operators. Their advanced features, reliable construction, and innovative technologies set a high standard in the industry, making them essential tools for effective land management.
Top Page Image Contents