Land Pride

Table of Contents

Section 4: Maintenance & Lubrication

Flex Couplers

Refer to Figure 4-6:

Replace rubber disc (#6) as follows:

1.Insert 3-bolts (#1) through the holes in flange weldment (#7).

2.Place beaded washers over the 3-bolts with bead facing rubber disc (#6).

3.Place bushings (#3), rubber disc (#6) and washers (#4) over the 3-bolts as shown.

4.Secure with nuts (#5). Do not tighten.

5.Insert 3-bolts (#1) through the holes in flanged hub (#8).

6.Repeat steps 2 through 4.

7.Tighten nuts (#5) evenly with nuts torqued 35 to

40 ft-lb. Beaded washers (#2) should be imbedded halfway into the rubber disc.

22325

Flex Couplers

Figure 4-6

Land Pride Skid Shoe Replacement Parts

Part No.

Part Description

 

 

312-602D

SKID SHOE

802-603C

PLOW 3/8-16 x 1 GR5

803-198C

NUT HEX WHIZ 3/8-16 PLT

1.Remove 3/8" hex whiz nuts (#3), 3/8" plow bolts (#2) and skid shoe (#1) as shown.

2.Plow bolts should be checked for wear and replaced if necessary.

3.Attach new skid shoe (#1) to cutter with existing 3/8” plow bolts (#2) and secure with 3/8" hex whiz nuts. Torque to 31 ft. lbs.

4.Repeat on opposite side.

Tractor Maintenance

One of the most important things you can do to prevent hydraulic system problems is to ensure that your tractor's reservoir remains free of dirt and contamination.

Use a clean cloth to wipe the hose ends before attaching them to your tractor. Replace the filter element for your tractor’s hydraulic system at the prescribed intervals.

These simple maintenances will go a long way to prevent the occurrence of cartridge valve and hydraulic cylinder problems on the Rotary Cutter.

Storage Instructions

It is good practice to clean off any dirt or grease that may have accumulated on the cutter and moving parts at the end of the working season and when the cutter will not be used for a long time.

Skid Shoe Maintenance

Refer to Figure 4-7:

!WARNING!

Excessive wear on skid shoes may cause inadequate operation of cutter and create a safety hazard!

There are two skid shoes mounted on the cutter sides. Check both skid shoes for wear and replace if necessary. Order only genuine Land Pride parts from your local Land Pride Dealer.

22410

Skid Shoe Replacement

Figure 4-7

!DANGER!

Always disconnect main driveline from tractor PTO and secure cutter deck in the up position with solid supports before servicing the underside of the cutter.

1.Clean the cutter as necessary.

2.Check the blades for wear and replace if necessary, see “Service Cutting Blades”, Page 28.

3.Inspect the cutter for loose, damaged or worn parts and adjust or replace as needed.

4.Lubricate as noted in “Lubrication”, page 32.

5.Store the cutter inside if possible for longer cutter life.

6.Repaint parts where paint is worn or scratched to prevent rust. Ask your dealer for Aerosol Land Pride touch-up paints.

Land Pride Touch-up Paints

Part No.

Part Description

821-011C PAINT LP BEIGE SPRAY CAN

821-002C PAINT GP BLACK SPRAY CAN

821-054C PAINT MEDIUM RED SPRAY CAN

821-058C PAINT GREEN SPRAY CAN

5/09/08

RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M

31

Page 32 Page 34
Page 33
Image 33
Land Pride RCR2596, 312-753M, RCRM2510 manual Flex Couplers, Tractor Maintenance, Storage Instructions, Skid Shoe Maintenance
Page 32 Page 34

312-753M, RCR2510, RCRM2510, RCR2596 specifications

Land Pride, a leading manufacturer of agricultural and landscaping equipment, has established a strong reputation for producing innovative and durable products. Among their diverse range of offerings are the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 models, each engineered with specific features to cater to various land management and maintenance tasks.

The Land Pride 312-753M is an advanced grooming mower designed for meticulous finishing work in landscape applications. With a cutting width of 75 inches, it is suitable for a range of tasks from mowing parks to maintaining golf course fairways. Its floating deck design allows for optimal contour following, ensuring a clean cut even on uneven terrain. The mower features a robust construction with reinforced edges that enhance durability, and the blade tip speed maximizes cutting efficiency.

Next in the lineup, the RCR2596 rotary cutter is engineered for heavy-duty mowing, making it ideal for clearing tall grass and brush in fields and pastures. With a 96-inch cut width, the RCR2596 boasts a rugged design that can handle various terrains and dense vegetation. Its heavy-duty gearboxes and cutting blades are built to last, providing operators with peace of mind during extensive operations. The RCR2596 also includes a side skirt that improves safety by containing debris while mowing.

The RCRM2510 is a robust rotary cutter that combines performance with efficiency. Designed for smaller tractors, it features a 10-foot cutting width, making it an excellent choice for tasks demanding precision and power. The RCRM2510 incorporates a fully adjustable hitch that allows for easy attachment to various tractor models. Additionally, its floating design permits it to follow the contours of the land, optimizing its cutting capabilities across diverse landscapes.

Lastly, the RCR2510 model is another addition to the rotary cutter series, renowned for its versatile applications. With a cutting width of 10 feet, it is perfect for managing overgrown fields, pastures, and large landscaped areas. The RCR2510 features heavy-duty construction intended to withstand challenging conditions, ensuring longevity and reliability. Its user-friendly design facilitates easy maintenance, and the premium blades deliver exceptional cutting performance.

In summary, the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 rotary cutters offer exceptional capabilities tailored to meet the needs of both professional landscapers and agricultural operators. Their advanced features, reliable construction, and innovative technologies set a high standard in the industry, making them essential tools for effective land management.
Top Page Image Contents