Table of Contents

Section 2: Adjustments

Leveling Procedure

Lift-type and Pull-Type cutters must operate level from side to side at all times. Gauge wheels should be set at identical heights.

Lift-Type Cutter

There are four primary adjustments that should be made prior to actual field operations:

a. Deck level from left to right

Pull-Type Cutter

There are two primary adjustments that should be made prior to actual field operations:

a.Deck level from left to right

b.Cutting height

Proper adjustment of each of these items will provide for higher efficiency, improved cutting performance and longer blade life. The following tools will be needed:

b.Tractor top link length

c.Tractor lower link height

d.Tailwheel height

Proper adjustment of each of these items will provide for higher efficiency, improved cutting performance and longer blade life. The following tools will be needed:

a.Pliable tape measure

b.Spirit or carpenter’s level

c.Open end or hex end wrench or socket set

d.Protective gloves

Refer to Figure 2-1:

a.Pliable tape measure

b.Spirit or carpenter’s level

c.Open end or hex end wrench or socket set

d.Protective gloves

Refer to Figure 2-2:

1.Having completed “Tractor Hook-up”, locate tractor and cutter on a flat, level surface.

2.Use tractor’s hydraulics to adjust deck height above ground level 2 to 3 inches.

3.Place a spirit level (#3) or other suitable leveling device on either of the main deck channels.

1.Having completed the “Tractor Hook-up”, locate the tractor on a flat, level surface.

2.Use the tractor’s hydraulic 3-point control to lower the cutter until the tailwheel contacts ground surface.

3.Place a spirit level or other suitable leveling device on the front of the cutter deck as shown. Adjust either one or both of the tractors lower link height adjustments to level the deck from left to right. Some tractors have only a single adjusting crank.

4.Similarly, place a level on either of the main deck channels. Shorten or lengthen the tractor’s top center link to level the cutter deck from front to rear.

NOTE: The unit cuts most efficiently if the front of the cutter is slightly lower than the back.

22315

NOTE: The unit cuts most efficiently if the front of the cutter is slightly lower than the back.

Lengthening leveling rods with adjusting nuts (#2) lowers the front of the cutter.

4.If cutter deck is not slightly lower at the front than at the back, then loosen jam nuts (#1) on both sides and rotate leveling rod adjusting nuts (#2) until deck is slightly lower by an equal amounts on both sides.

5.Be sure that the right and left leveling rods are equally tight and then re-tighten jam nuts (#1).

26559

Deck Leveling

Deck Leveling

Figure 2-1

Figure 2-2

22 RCR2596, RCR2510 and RCRM2510 Rotary Cutters 312-753M

5/09/08

Page 23 Page 25
Page 24
Image 24
Land Pride 312-753M, RCR2596, RCRM2510 Leveling Procedure, Adjustments, Lift-Type Cutter, Pull-Type Cutter, Deck Leveling
Page 23 Page 25

312-753M, RCR2510, RCRM2510, RCR2596 specifications

Land Pride, a leading manufacturer of agricultural and landscaping equipment, has established a strong reputation for producing innovative and durable products. Among their diverse range of offerings are the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 models, each engineered with specific features to cater to various land management and maintenance tasks.

The Land Pride 312-753M is an advanced grooming mower designed for meticulous finishing work in landscape applications. With a cutting width of 75 inches, it is suitable for a range of tasks from mowing parks to maintaining golf course fairways. Its floating deck design allows for optimal contour following, ensuring a clean cut even on uneven terrain. The mower features a robust construction with reinforced edges that enhance durability, and the blade tip speed maximizes cutting efficiency.

Next in the lineup, the RCR2596 rotary cutter is engineered for heavy-duty mowing, making it ideal for clearing tall grass and brush in fields and pastures. With a 96-inch cut width, the RCR2596 boasts a rugged design that can handle various terrains and dense vegetation. Its heavy-duty gearboxes and cutting blades are built to last, providing operators with peace of mind during extensive operations. The RCR2596 also includes a side skirt that improves safety by containing debris while mowing.

The RCRM2510 is a robust rotary cutter that combines performance with efficiency. Designed for smaller tractors, it features a 10-foot cutting width, making it an excellent choice for tasks demanding precision and power. The RCRM2510 incorporates a fully adjustable hitch that allows for easy attachment to various tractor models. Additionally, its floating design permits it to follow the contours of the land, optimizing its cutting capabilities across diverse landscapes.

Lastly, the RCR2510 model is another addition to the rotary cutter series, renowned for its versatile applications. With a cutting width of 10 feet, it is perfect for managing overgrown fields, pastures, and large landscaped areas. The RCR2510 features heavy-duty construction intended to withstand challenging conditions, ensuring longevity and reliability. Its user-friendly design facilitates easy maintenance, and the premium blades deliver exceptional cutting performance.

In summary, the Land Pride 312-753M, RCR2596, RCRM2510, and RCR2510 rotary cutters offer exceptional capabilities tailored to meet the needs of both professional landscapers and agricultural operators. Their advanced features, reliable construction, and innovative technologies set a high standard in the industry, making them essential tools for effective land management.
Top Page Image Contents