Table of Contents
Important Safety Information
Land Pride
Safety Labels
Your Rotary Cutter comes equipped with all safety labels in place. They were designed to help you safely operate your implement.
1.Read and follow label directions.
2.Keep all safety labels clean and legible.
3.Replace all damaged or missing labels.
4.Some new equipment installed during repair require safety labels to be affixed to the replaced component as specified by Land Pride. When ordering new components make sure the correct safety labels are included in the request. To order new labels go to your Land Pride dealer.
5.Refer to this section for proper label placement. To install new labels:
a.Clean the area the label is to be placed.
b.Spray soapy water on the surface where the label is to be placed.
c.Peel backing from label. Press firmly on surface
d.Squeeze out air bubbles with the edge of a credit card or with a similar type straight edge.
|
|
|
|
|
| 21428 | Caution 540 RPM |
|
|
| |
|
| 21428 |
|
|
| Danger PTO | |
|
|
| |
|
|
|
|
|
| 21428 | Danger Guard Missing |
4 | RCR1860 and RCR1872 Series Rotary Cutters | 12/17/07 |
