Table of Contents

Important Safety Information . . . . . . . . . . .1

Safety at All Times . . . . . . . . . . . . . . . . . . . . . . . . . 1

Look For The Safety Alert Symbol . . . . . . . . . . . . . 1

Safety Labels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Introduction . . . . . . . . . . . . . . . . . . . . . . . .8

Application . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Using This Manual . . . . . . . . . . . . . . . . . . . . . . . . . 8

Terminology . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Owner Assistance . . . . . . . . . . . . . . . . . . . . . . . . . 8

Further Assistance . . . . . . . . . . . . . . . . . . . . . . 8

Section 1: Assembly and Set-Up . . . . . . . .9

Tractor Requirements . . . . . . . . . . . . . . . . . . . . . . 9 Weight & Horsepower . . . . . . . . . . . . . . . . . . . . 9 PTO Type & Speed . . . . . . . . . . . . . . . . . . . . . . 9 3-Point Hitch . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 Dealer Preparations . . . . . . . . . . . . . . . . . . . . . . . . 9 Hitch Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Tailwheel Assembly . . . . . . . . . . . . . . . . . . . . . . . 10 Driveline Installation . . . . . . . . . . . . . . . . . . . . . . . 10 Safety Guards (Optional) . . . . . . . . . . . . . . . . . . . 11 Front Chain Guards . . . . . . . . . . . . . . . . . . . . . 11 Rear Chain Guards . . . . . . . . . . . . . . . . . . . . . 11 Front Rubber Guards . . . . . . . . . . . . . . . . . . . 11 Rear Rubber Guards . . . . . . . . . . . . . . . . . . . . 11 Vent Plug Installation . . . . . . . . . . . . . . . . . . . . . . 12 Tractor Hook-Up . . . . . . . . . . . . . . . . . . . . . . . . . 12 PTO Hook-up . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Hydraulic Hook-Up . . . . . . . . . . . . . . . . . . . . . 13 Un-Hooking from the Tractor . . . . . . . . . . . . . . . . 13

Section 2: Adjustments . . . . . . . . . . . . . .14

Leveling Procedure . . . . . . . . . . . . . . . . . . . . . . . 14

Minimum Cutting Height . . . . . . . . . . . . . . . . . 14

Cutter Height Adjustment . . . . . . . . . . . . . . . . . . . 14

Section 3: Operating Instructions . . . . . .15

Operating Check List . . . . . . . . . . . . . . . . . . . . . . 15

Transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Offset Function . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Cutting Instructions . . . . . . . . . . . . . . . . . . . . . . . 16

Crossing Steep Ditches & Banks . . . . . . . . . . . . . 16

General Operating Instructions . . . . . . . . . . . . . . 17

Section 4: Maintenance and Lubrication 18

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Service Cutting Blades . . . . . . . . . . . . . . . . . . . . . 18

Driveline Clutch . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Clutch Run-In . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Clutch Assembly and Disassembly . . . . . . . . . . . 19

Flex Couplers . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Skid Shoe Maintenance . . . . . . . . . . . . . . . . . . . . 20

Tractor Maintenance . . . . . . . . . . . . . . . . . . . . . . 20

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Lubrication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Tailwheel Spindle Tube . . . . . . . . . . . . . . . . . . 21

Tailwheel Hub . . . . . . . . . . . . . . . . . . . . . . . . . 21

Gearbox & T-Box . . . . . . . . . . . . . . . . . . . . . . . 21

Offset Arms . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Driveline U-Joints . . . . . . . . . . . . . . . . . . . . . . 22

Driveline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Flex Coupler . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Ratchet Jack . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Section 5: Specifications & Capacities . .24

Section 6: Features and Benefits . . . . . .25

Section 7: Troubleshooting . . . . . . . . . . .26

Section 8: Appendix . . . . . . . . . . . . . . . . .28

Torque Values Chart for Common Bolt Sizes . . . . 28 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Land Pride provides this publication “as is” without warranty of any kind, either expressed or implied. While every precaution has been taken in the preparation of this manual, Land Pride assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein. Land Pride reserves the right to revise and improve its products as it sees fit. This publication describes the state of this product at the time of its publication, and may not reflect the product in the future.

Land Pride is a registered trademark.

All other brands and product names are trademarks or registered trademarks of their respective holders.

Printed in the United States of America.

RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M

6/26/06

RCSM3510, RCSM3596, RCS3596, RCS3510 specifications

Land Pride is a leading manufacturer of agricultural and landscaping equipment, known for its dedication to quality and innovation. Among its impressive lineup are the RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters, specifically engineered to meet the diverse demands of land clearing and maintenance.

Starting with the RCS3510, this model features a cutting width of 10 feet, making it ideal for larger areas that require efficient vegetation management. Its robust design incorporates a 1/4-inch steel deck for enhanced durability and ruggedness under various terrain conditions. This model offers adjustable skids that enable operators to manage cutting height effectively, ensuring an optimal finish on different surfaces.

Next, the RCS3596 delivers a slightly larger cutting width of 96 inches, making it perfect for commercial applications. It is built with a heavy-duty frame and offers a reinforced steel deck that withstands harsh conditions. The RCS3596 is equipped with a cutting mechanism that utilizes dual-blade technology, ensuring a cleaner cut and more efficient operation. The quick-attach hitch system also enhances productivity by enabling fast and easy attachment to various tractors.

For those who require a more compact solution, the RCSM3596 and RCSM3510 models offer a slimmed-down approach without compromising performance. The RCSM3596 has a cutting width of 96 inches, and its high-strength gearboxes ensure reliable power transfer and longevity. This model has a unique feature where the winged design allows for easy maneuverability in tight spaces while still providing excellent cutting capabilities.

The RCSM3510 features a 10-foot cutting width with a lightweight structure that maximizes tractor efficiency. Both RCSM models come with a low-profile design, allowing for optimal visibility and precision during operation. In terms of safety, all four models incorporate shielded gearboxes and safety features that protect the operator and enhance overall job site safety.

In conclusion, the Land Pride RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters represent a blend of performance, durability, and advanced technologies that meet the needs of modern land management. With their heavy-duty construction, innovative designs, and user-friendly features, these models stand out in the competitive market, delivering exceptional value to operators seeking reliable and efficient cutting solutions. Whether managing large fields or navigating tight spaces, Land Pride rotary cutters are engineered to excel in any task.

Land Pride RCSM3596, RCS3510, RCS3596, RCSM3510 manual Table of Contents

Models: RCSM3510 RCSM3596 RCS3596 RCS3510

RCSM3510, RCSM3596, RCS3596, RCS3510 specifications