Land Pride | Table of Contents |
Section 6: Features and Benefits
| RCS(M)3596 & RCS(M)3510 Series |
|
|
Features | Benefits |
|
|
Surpassed rugged | All Land Pride Cutters have been designed and tested and meet rigorous voluntary testing |
industry standards | procedures specified by ANSI. |
|
|
Tractor HP range | |
|
|
540 or 1000 RPM | Fits wider variety of tractors. |
|
|
5 Year limited | Shows our confidence in the gearbox integrity. |
gearbox warranty |
|
|
|
3 Gearboxes | Allows equal torque to be spread to left and right gearbox. |
|
|
Gearbox HP rating | 120 Horsepower on splitter gearbox and 100 HP on wing gearboxes. |
|
|
Splined rubber | Protects the driveline and gearboxes from hard objects in the blade path. |
between center and |
|
outboard gearboxes |
|
|
|
on main driveline |
|
|
|
|
|
Offset capability | Offset 13” right and left, hydraulically for time saving maneuverability. |
|
|
Cutting Width | |
|
|
10 Gauge deck, fully welded | Fully welded deck adds rigidity. |
|
|
1/4” Thick sidewalls | Protects sidewalls from thrown objects. |
|
|
Obstacle free underside | Underside of deck is free of reinforcement members which tend to allow material to lodge. |
|
|
Round back design | Allows for cleaner and efficient discharge of material, helps eliminate damage to rear |
| corners by not sticking out. |
|
|
Chain or rubber guards | Reduces flying debris. |
|
|
Full length skids with | Adds reinforcement to side panels. Replaceable shoes allow for change before wearing |
replaceable shoes | through to |
|
|
Splined blade hub | Splined blade hub offers tight |
|
|
3/16” Round stump jumper | Standard stump jumper aids in sliding over obstructions, which helps protect gearbox |
| output shaft. |
|
|
1/2” x 4” Blade bar | |
|
|
1/2” x 4” | |
|
|
2” Diameter cutting capacity | Aids in cutting brush. |
|
|
High Blade tip speed | 96” deck width - (540 rpm = 14,223 fpm; 1000 rpm = 14,442 fpm) |
| |
| Allows clean cutting of material. |
|
|
Laminated tires | Laminated tires can handle almost any condition and don’t go flat. |
|
|
Quick hitch adaptable | Both 96” and |
|
|
6/26/06 | RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters | 25 |