Land Pride

Important Safety Information

Table of Contents

These are common practices that may or may not be applicable to the products described in this manual.

Safety at All Times

Thoroughly read and understand the instructions given in this manual before operation. Refer to the “Safety Label” section, read all instructions noted on them.

Do not allow anyone to operate this equipment who has not fully read and comprehended this manual and who has not been properly trained in the safe operation of the equipment.

Look For The Safety Alert Symbol

The SAFETY ALERT SYMBOL indicates there is a

!safety precaution must be taken. When you see this symbol, be alert and carefully read the message that follows it. In addition to design and configuration of equipment, hazard control and accident prevention are dependent upon the awareness, concern, prudence and proper training of personnel involved in

the operation, transport, maintenance and storage of equipment.potential hazard to personal safety involved and extra

▲ Operator should be familiar with

all functions of the unit.

▲ Operate implement from the

driver’s seat only.

▲ Make sure all guards and shields

are in place and secured before

operating the implement.

▲ Do not leave tractor or implement

unattended with engine running.

▲ Dismounting from a moving

tractor could cause serious injury

or death.

▲ Do not stand between the tractor

and implement during hitching.

▲ Keep hands, feet, and clothing

away from power-driven parts.

▲ Wear snug fitting clothing to avoid

entanglement with moving parts.

▲ Watch out for wires, trees, etc.,

when raising implement. Make

sure all persons are clear of

Be Aware of

Signal Words

A Signal word designates a degree or level of hazard seriousness. The signal words are:

!DANGER

Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is limited to the most extreme situations, typically for machine components that, for functional purposes, cannot be guarded.

!WARNING

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury, and includes hazards that are exposed when guards are removed. It may also be used to alert against unsafe practices.

!CAUTION

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.

working area.

▲ Turning tractor too tight may

cause implement to ride up on

wheels. This could result in injury

or equipment damage.

For Your Protection

▲Thoroughly read and understand the “Safety Label” section, read all instructions noted on them.

Shutdown and Storage

▲Lower machine to ground, put tractor in park, turn off engine, and remove the key.

▲Detach and store implements in a area where children normally do not play. Secure implement by using blocks and supports.

OFF

6/26/06

RCS3596, RCSM3596, RCS3510 & RCSM3510 Series Rotary Cutters 312-708M

1

Page 2 Page 4
Page 3
Image 3
Land Pride RCSM3510 manual Important Safety Information, Be Aware Signal Words, For Your Protection, Shutdown and Storage
Page 2 Page 4

RCSM3510, RCSM3596, RCS3596, RCS3510 specifications

Land Pride is a leading manufacturer of agricultural and landscaping equipment, known for its dedication to quality and innovation. Among its impressive lineup are the RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters, specifically engineered to meet the diverse demands of land clearing and maintenance.

Starting with the RCS3510, this model features a cutting width of 10 feet, making it ideal for larger areas that require efficient vegetation management. Its robust design incorporates a 1/4-inch steel deck for enhanced durability and ruggedness under various terrain conditions. This model offers adjustable skids that enable operators to manage cutting height effectively, ensuring an optimal finish on different surfaces.

Next, the RCS3596 delivers a slightly larger cutting width of 96 inches, making it perfect for commercial applications. It is built with a heavy-duty frame and offers a reinforced steel deck that withstands harsh conditions. The RCS3596 is equipped with a cutting mechanism that utilizes dual-blade technology, ensuring a cleaner cut and more efficient operation. The quick-attach hitch system also enhances productivity by enabling fast and easy attachment to various tractors.

For those who require a more compact solution, the RCSM3596 and RCSM3510 models offer a slimmed-down approach without compromising performance. The RCSM3596 has a cutting width of 96 inches, and its high-strength gearboxes ensure reliable power transfer and longevity. This model has a unique feature where the winged design allows for easy maneuverability in tight spaces while still providing excellent cutting capabilities.

The RCSM3510 features a 10-foot cutting width with a lightweight structure that maximizes tractor efficiency. Both RCSM models come with a low-profile design, allowing for optimal visibility and precision during operation. In terms of safety, all four models incorporate shielded gearboxes and safety features that protect the operator and enhance overall job site safety.

In conclusion, the Land Pride RCS3510, RCS3596, RCSM3596, and RCSM3510 rotary cutters represent a blend of performance, durability, and advanced technologies that meet the needs of modern land management. With their heavy-duty construction, innovative designs, and user-friendly features, these models stand out in the competitive market, delivering exceptional value to operators seeking reliable and efficient cutting solutions. Whether managing large fields or navigating tight spaces, Land Pride rotary cutters are engineered to excel in any task.
Top Page Image Contents