Macintosh
Installing Printer Driver 3 - 13
Setting Up the PPD File
Confirm that the printer is connected to an AppleTalk network before performing the following
procedure.
1On the [Apple] menu, select [Chooser].
2Click the [Adobe PS] ic o n.
3In the [Select a PostScript P r i nter:] list, click the name of the printer you want to use.
4Click [Create].
5Click the printer you want to use, and then click [Select].
•The PPD file is set up, and the [Adobe PS] icon appears at the left of the printer name in
the list. Next, make the option settings, or close the [Chooser] dialog box.
Setting Up Options
1On the [Apple] menu, select [Chooser].
2Click the [Adobe PS] ic o n.
3In the [Select the PostScript Printer:] list, click the name of the printer you want to use,
and then click [Setup].
4Click [Configure].
•A list of options appears.
5Select the option you want to set up and select the appropriate setting for it.
•If the option you want to set up is not displayed, the PPD file might not be set up
correctly. Check the name of the PPD file shown in the dialog box.
6Click [OK].
•The list of options closes.
7Click [OK].
•The [Chooser] dialog box appears.
8Close the [Chooser] dialog box.