Job Control Menu
Using the Control Panel 7 - 7
Job Control Menu

Job Control Pa rameters

Paper Input

Print Quality

There are 4 menus in th e “Job Control” menu.

•Paper Input
•Print Quality
•System
•PCL Menu
Menu Description
Tray Priority You can spe cify the default tray. The tray selection specified with the
printer driver overrides the one specified here. In DOS printing, the
tray specified here is used, when no tray is specified for a p rint job.
Tray1, Tray2, Tray3, Tray4
Default: Tray1
Only the installed trays appear on the panel display.
It is recommended that you load paper having the size and direction
you frequently use in the tray selected with the “Tray Priority”.
Tray Locking If you use several different kinds o f paper, you can lock a tray to
prevent printing on wrong paper. When you want to use the locked
tray, specify it using the printer dr iver.
None, Tray1, Tray2, Tray3, Tray4
Default: None
Only the installed trays appear on the panel display.
You cannot lock multiple trays at once.
When a locked tray is specified using the printer dr iver, the printer
does not search for any other t ray.
Bypass Tray You can specify th e paper size for the bypass tray.
Default: A4 (Metric version), 8 1/2“ x 11" (Inch version)
width: 90mm (3.53") to 297mm (11")
length:148mm (5.83") to 432mm (17")
Menu Description
Edge
Smoothing
You can specify whether the Edge Smoothing feature is enabled.
On
Off
Default: On
If "Edge Smoothing" is "On", "Toner Saving" is ignored even if it is
"On".