Connecting to the Printer
Introduction 1 - 3
Connecting the Printer U sing the Network Interfac e Board 185
Connect the printer to the network using the Network Interface Board 185.
Follow these steps to connect the printer.
1Confirm that you have the correct cable.
2Confirm that the machine is turned off.
3Loop the network cable. The loop should be about 10cm (4”) from the end of the cable on
the end closest to the printer.
4Attach the ferrite core to the loop.
5Attach the network cable to the 10BASE-T/100BASE-TX port on the machine.
•Confirm that the cable is connected to the 10BASE-T/100BASE-TX port.
•Do not connect the cable into the fax port.
6Connect the other end of the cable into the network.
TAHX010E