Specifying the Custom Paper Size for the By-
pass Tray
Using the Control Panel 7 - 13
Specifying the Custom Paper Size for the Bypass Tray
1Press {User Tools}.
2Press {4} on the number keys.
3Press [Up Arrow ] or [Down Arrow] keys until “Job Control” appears, and then press
[Enter #].
4Press [Up Arrow] or [Down Arrow] keys until “Paper Input” appears, and then press
[Enter #].
5Press [Up Arrow] or [Down Arrow] keys until “Bypass Size” appears, and then press
[Enter #].
6Specifying the standard size.
1. After confirming that “Standard Size” is displayed, press [Enter #].
2. Press [Up Arrow] or [Down Arrow] keys until “Custom Size” is displayed, and
then press [Enter #] .
7Specify the Cus tom Size.
1. Press [Up Arrow] or [Down Arrow] until “Custom Size” is displayed, press