Guide to Components

1.Exposure glass

Position single-page originals here face down for copying. See ⇒ P.15 “Origi- nals”.

2.Document feeder (ARDF)

The document feeder automatically feeds a stack of originals one by one.

3.Control panel

See ⇒ P.7 “Control Panel”.

4.On indicator

This indicator lights after you press the operation switch.

5.Operation switch

Press this switch when you wish to use the machine. The On indicator lights when this switch is pressed.

7.Paper tray

Set copy paper here.

Tray 1 is a tandem tray where the paper on the left side automatically moves to the right when paper on the right has run out. See ⇒ P.277 “B Loading Paper”.

8.Main power switch

Press to turn the main power on or off. We recommend you only turn this switch off when the machine is not going to be used for an extended period of time (e.g. over a vacation).

Note

❒If the On indicator does not light when you press the operation switch, make sure the main power switch is set to on.

6.Front cover

Open to remove misfed paper.

9.Toner cover

Open to change the toner bottle.

4