Connect Copy (Option)

Functions Not Available with Connect Copy

The following functions are not available in Connect Copy mode:

• Job Preset

Interrupt Functions

 

 

•

You cannot use Connect Copy when a job has been paused using the Inter-

 

 

 

rupt function.

 

 

•

You can use the Interrupt function on the sub-unit while in Connect Copy

 

 

 

mode, but only when the master unit is not scanning originals.

 

 

•

You cannot use other functions in Connect Copy mode no matter how the

4

 

 

“Output Priority” of the User Tools (System Settings) is programmed.

 

 

• You cannot switch to other functions while in Connect Copy mode. To access

 

 

 

other functions you must exit Connect Copy mode.

 

 

• While you use other functions, you cannot use Connect Copy mode.

 

 

 

 

 

Before You Start

 

 

 

 

 

Both machines must have paper trays loaded with paper of the same size, direc-

 

 

tion and type that you wish to copy onto.

 

 

To make the most out of the Connect Copy feature, we recommend that :

 

 

•

The paper tray settings of the master unit and sub-unit should match each

 

 

 

other.

 

 

•

The “Original Mode Level”of the User Tools (Copier/Document Server Fea-

 

 

 

tures) settings should be the same on each unit. If they are not the same, the

 

 

 

copied images may differ. See ⇒ P.314 “Original Mode Level”

 

 

•

The User Stamp settings should be the same on each unit. If they are not the

 

 

 

same, the copied images may differ. See “Program/Delete Stamp” .⇒ P.174

“Program/Delete User Stamp”

242