Using Connect Copy

❒When scanning from the exposure glass, set the next page(s) when scan- ning has finished, then press the {Start} key. When all pages have been scanned in, press the {#}key. Copying starts simultaneously in the master unit and sub-unit.

❒To stop originals being scanned or copied, press the {Stop}key on the mas- ter unit and follow the instructions on the display, press the [Yes] key.

G Pick up your copies from the master unit and sub-unit.

Note

 

❒ The number of copy sets made by the master unit and sub-unit may differ.

 

❒ The master unit and sub-unit may not finish copying exactly at the same

 

time.

 

❒ When using the Sort/Staple function, copies are organized into copy sets.

4

If there is a paper misfeed in one machine during this process, it is not pos-

sible for the other machine to take over the copy set processing of the non functional machine.

❒When using Document Server functions, only the master unit will make copies by the combination of the features.

-Copy output order

❖When copying in Sort/Staple mode

e.g., copying 6-sets of a 3-sheet original

•Copying with the master unit (face-down output)—sub-unit (face-down output)

1.Master unit

2.Sub-unit

When using Sort/Staple, your copies sets are not split between the master unit and sub-unit.

249