What to do if Something Goes Wrong

Connect Copy

Machine Status

Cause

Action

 

 

 

You can not use the Punch

The sub-unit does not have

Press the [Connect Copy]

function.

the optional punch kit.

key to disconnect, then

 

 

start copying.

 

 

 

The copied images differ.

The “Original Mode” of the

See ⇒ P.318 “Adjust Image”

 

user tools (Copy Features)

 

 

settings are not the same.

 

 

 

 

 

The user stamp settings are

Register the same stamp in

 

not the same on the master

each user stamp.

 

unit and sub-unit.

 

 

 

 

 

 

 

 

 

When Memory is Full

5

 

 

 

If the number of originals exceeds a certain limit, the machine will run out of

 

 

 

memory, for Connect Copy scans in all your originals into memory.

Limitation

❒If memory is full on either the master unit or sub-unit, Interrupt will not be available.

Note

❒If you set the “Memory Full Auto Scan Restart” setting in the User Tools (Copier/Document Server Features) to “Yes”, the memory overflow message will not be displayed, but originals scanned so far will be copied automatical- ly. Connect Copy continues scanning and copying until finishing the job. Please note that copy sets will be printed out separated by scanning at this time.

Machine Status

Action

 

 

The memory is full.

Press the [Output] key to copy scanned

 

originals and clear the scanning data.

 

Press the [Clear] key to clear the scanning

 

data and not copy.

 

 

The machine asks you whether you want

To continue copying, remove all copies

to scan the remaining originals.

then press the [Resume] key. To stop copy-

 

ing, press the [Cancel] key.

 

 

276