Copying

Setting Originals

Limitation

❒Set originals after correction fluid and ink has completely dried. Not taking this precaution could mark the exposure glass and cause marks to be copied.

2 Note

❒Normally originals should be aligned to the rear left corner. However, some copy functions may produce different results depending on the direction of the originals. For details, see the explanations of each function in this manual.

Reference

See ⇒ P.15 “Originals”.

Setting Originals on the Exposure Glass

ALift the document feeder.

Note

❒Be sure to open the document feeder by more than 20° otherwise the orig- inal size might not be detected correctly.

26