AdonisC3_GBcopyF_FM1.book Page 101 Thursday, November 28, 2002 1:53 PM

Accessing User Tools (Copier/Document Server Features)

❖Page Numbering in Combine

You can set page numbering when using the Combine function and the Page Numbering function to- gether.

Note

❒Default: Per original

❖Stamp on Designated Slip Sheet

You can select to print the page number onto slip sheets when us- ing the Designate function set to [Copy] and the Page Numbering function together.

Note

❒Default: No

❖Stamp Position

P1, P2... Stamp Position: 1/5, 2/5...

Stamp Position: –1–, –2–... Stamp

Position: P.1, Pie. Stamp Position:

1, 2... Stamp Position: 1–1, 1–2...

You can set the position at which the stamp is printed.

Press the arrow keys to adjust the position.

❖Superimpose

You can have page numbers print- ed in white when they overlap black parts of the image.

Note

❒Default: No

Input/Output

❖Switch to Batch (SADF)

You can select to have Batch mode or SADF mode displayed when you press the Special Original key. See p.12 “Batch mode”.

Note

❒ Default: Batch

❖SADF Auto Reset

When you set one original at a time

in the ADF, the Auto Feed indica- 4 tor lights for a specified time after

an original is fed to show that the ADF is ready for another original. You can adjust this time from 3 seconds to 99 in 1 second increments.

Note

❒Default: 5 seconds.

❖Rotate Sort: Auto Paper Continue

You can specify to continue copy- ing when paper of the required ori- entation has run out during rotate- sorting. See p.31 “Rotate Sort”.

Note

❒If you select [No] :

•When paper of the required orientation runs out, the ma- chine stops copying and prompts you to supply copy paper. When you load paper, the machine will continue copying.

❒If you select [Yes] :

•Copying continues using copy paper of a different ori- entation. The copy job will finish even if you have left the machine.

❒Default: No

101