AdonisC3_GBcopyF_FM1.book Page 18 Thursday, November 28, 2002 1:53 PM

Copying

Copying from the Bypass Tray

2

Use the bypass tray to copy onto OHP transparencies, adhesive labels, translucent paper, postcards and copy paper that cannot be loaded in the paper trays.

Metric

A3L, A4KL, A5KL, 81/2"

version

⋅ 13"L

 

 

Inch

A3L, 11" ⋅ 17"L, 81/2" ⋅

version

11"KL, 51/2" ⋅ 81/2"L

❒ When copying on OHP transpar-

Preparation

When the duplex unit is attached, the default is [1 Sided → 2 Sided].

When copying from the bypass tray, select [1 Sided] for copying in [Dup./Combine/Series] (for example [1 Sided → 1 Sided] or [2 Sided → 1 Sided] ). You can change the initial settings. See p.92 “Duplex Mode Priority” .

Important

❒When paper larger than 433 mm in size is used, the paper may become wrinkled, may not be fed into the machine, or may cause paper jams.

Note

❒If you do not use the standard size copy paper or if you use special pa- per, you should input vertical and horizontal dimensions. See p.14 “Placing custom size originals”. The sizes that you can input are as follows:

Metric

•

Vertical: 100–297 mm

version

• Horizontal: 148–600 mm *1

 

 

 

Inch

•

Vertical: 3.9"–11.6"

version

•

Horizontal: 5.8"–23.4" *1

*1 The range is 148-432 mm (5.8"-17") when the booklet finisher is in- stalled.

❒The machine can automatically de- tect the following sizes as standard size copy paper:

encies or paper heavier than 128

g/m2 (about 34 lb.), you need to

specify the paper type. See p.19

“When copying onto special pa-

per” .

❒ The maximum number of sheets

you can load at the same time de-

pends on paper type. The maxi-

mum number of sheets should not

exceed the upper limit.

A Open the bypass tray.

B Insert the paper with the side you want to copy facing down until you hear the beep, and then align the paper guide to the paper size.

1. Extender

18