AdonisC3_GBcopyF_FM1.book Page 14 Thursday, November 28, 2002 1:53 PM

Placing Originals

A Press [Special Original].

A Press [Special Original].

1

B Press [Mixed Size], and then press [OK].C Align the rear and left edges of the originals as shown.

1B4 A3

2

CP19AE

1.Place into the ADF2.Vertical size
B Press [Custm Size Origi.].

C Enter the horizontal size of the original with the number keys, and then press [#].

Note

If you make a mistake, press

[Clear] or the {Clear/Stop} key, and then enter the value again.

D Enter the vertical size of the original with the number keys, and then press [#].

E Press [OK].
D Adjust the guide to the widest original size.E Place the aligned originals face up into the ADF.

F Press the {Start} key.

Placing custom size originals

When placing custom size originals in the ADF, specify the size of the origi- nals.

Note

Paper that has a vertical length of 128–297 mm (5"–11") and a hori- zontal length of 128–1,260 mm (5"– 49") can be placed with this func- tion.

14