AdonisC3_GBcopyF_FM1.book Page 62 Thursday, November 28, 2002 1:53 PM

Copying

Reference

Related initial settings

p.99 “Stamp Position 1 - 4”

p.99 “Stamp Format 1 - 4”

A Press [Edit/Stamp].

2

B Press [Stamp].

C Press [User Stamp].D Select the stamp you require.

E Press [All Pages] or [1st Page only] to select the print page.

To change the stamp position

A Press [Change].

B Select the desired position, and then press [OK].To program the user stamp

Note

The range of stamp images for readability is 10–297 mm high (0.4"–11.7") and 10–432 mm (0.4"– 17") wide. However, if the value exceeds the maximum value of the area (5,000 mm2, 7.75 inch2), it is corrected within the range of the area automatically.

Up to four images that you use fre- quently can be stored in the ma- chine's memory.

A Make sure that the machine is in copier mode.B Press the {User Tools/Counter} key.

Note

C Press [Copier/Document Server Fea-

tures].

You can change the stamp posi- tion. See p.62 “To change the stamp position”.

F After making all settings, press [OK].

G Press [OK].

H Place the original, and then pressthe {Start} key.D Press [Stamp].E Press [User Stamp].

62