AdonisC3_GBcopyF_FM1.book Page 29 Thursday, November 28, 2002 1:53 PM

Copier Functions

B Press [Specifd. Ratio].C Make sure that [Specifd. Ratio] is highlighted.

D Enter the length of the original with the number keys, and then press the [#] key.

Note

You can enter sizes within the following ranges:

Metric

1–999 mm (in increments of

version

1 mm)

 

 

Inch

0.1"–99.9" (in increments of

version

0.1")

 

 

E Enter the length of the copy with the number keys, and then press [#].

Note

To change the length after pressing [#], select [Original] or [Copy] and enter the desired length.

F Press [OK].G Press [OK].H Place your original, and then press the {Start} key.

Directional Magnification (%)

Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically.

a%

2

b%

CP2P01EE

1.Horizontal ratio2.Vertical ratio

Note

You can also select a preset ratio close to the desired ratio using [Re- duce] or [Enlarge], then adjust with

[n] or [o].

A Press [Reduce/Enlarge].

B Press [Specifd. Ratio].

C Press [Direct. Mag.%].

To enter the ratio with the number keys

APress [Horizontal].BEnter the desired ratio with the number keys, followed by [#].CPress [Vertical].

29