AdonisC3_GBcopyF_FM1.book Page 75 Thursday, November 28, 2002 1:53 PM

Programs

F Press [OK].

When the settings are successfully stored, m appears on the left side and the program name appears on the right side of the registered program number. The display returns to the initial copy display for a while.

Changing a stored programA Check the program settings.

Note

When you want to check the contents of a program, recall the program. See p.75 “Recalling a Program”.

B Repeat steps A to D of “Storing a Program”.

C Press [Register].

Repeat steps E, F of ”Storing a Program ”.

Note

When it is overwritten, the pre- vious program is deleted.

Deleting a Program

A Press the {Program} key.B Press [Delete].
C Press the program number you want to delete.D Press [Yes].

The program is deleted, and the display returns to the initial copy display.

2

Recalling a Program

A Press the {Program} key.

B Press [Recall].C Press the program number you want to recall.

The stored settings are displayed.

Note

Program numbers with m against them already have set- tings in them.

D Place the originals, and then press the {Start} key.

75