LAN and VPI/VCI of WAN. Then save and reboot Router, it will work
fine with your whole system. The computer should be set the fixed
assigned IP address with the same domain at this mode.
If your ISP provides RFC1483 B ridge mode plus PPPoE, it means t he
IP address of computer or router will be assignedau tomaticallyvi a
PPPoE. There are two methods you can use at this m ode.Fi rst you
can set the "bridge"mode, give VPI/VCI of WAN and install PPPoE
driver on your computer. Then save and reboot router, it will work fine
with your whole system. You need t o use Dial_Up_Network to get the
IP address of computer every time. Second method you can set the
"PPPoE+NAT" mode, give VPI/VCI of WAN and set user's name &
password for PPPoE on your router. Then save and reboot router, it
will work fine with your whole system. The computers should be set as
DHCP client to get IP dynamically.
If your ISP provides RFC2364 mode, it means the IP address of router
will be assignedaut omaticallyvia PPPoA. You can set the
"PPPoA+NAT" mode, give VPI/VCI of WAN and set user's name &
password for PPPoA on your router. Then save and reboot router, it
will work fine with your whole system. The computers should be set as
DHCP client to get IP dynamically.
If your ISP provides RFC1483 R outeda nd the serial static IP address
for you, there are two methods you can use at this mode. Fi rst you can
set the "router" mode and give VPI/VCI of WAN. Then save and reboot
router, it will work fine with your whole system. The computers should
be set the fixed assigned IP address at this method. Second method
you can set the "NAT" mode, give VPI/VCI/ IP address /net mask of
WAN. Then save and reboot router, it will work fine with your wh ole
system. The computers should be set as DHCP client to get IP
dynamically.
Open the web browser, enter the local port IP address of the ADSL
Modem/Router, which default at , and click ' ' to get the login
page.