-Tone detection for low power mode

-Supports splitter less ADSL implementation

-Supports Dying Gasp

-Interoperable with all major DSLAM equipment

ATM Protocols

-WAN mode support: PPP over ATM (RFC 2364) and PPP over Ethernet (RFC 2516)

-LAN mode support: bridged/routed Ethernet over ATM (RFC 1483) and classical IP over ATM (RFC 1577)

-ATM Forum UNI 3.1/4.0 PVC

-Up to 8 VCs (virtual circuits)

-ATM SAR (segmentation and reassembly)

-ATM AALC (adoption layer type 5)

-OAM F4/F5

Bridge Mode

-Ethernet to ADSL self learning Transparent Bridging (IEEE 802.1D)

-Supports up to 128 MAC learning addresses

Router Mode

-IP routing-RIPv2

-Static routing

-DNS Proxy

-Port Forwarding

-DHCP (dynamic host configuration protocol) server and client

-NAT (network address translation)

-MAPT (network address and port translation)

-ICMP (Internet control message protocol)

-Simultaneous USB and Ethernet operation

Security

-User authentication for PPP

-PAP (password authentication protocol)

-CHAP (challenge authentication protocol)

-Password protected system management

Ethernet Interface

- Compliant with IEEE 802.3 and 802.3u 10/100 Mbps

HTTP Web-Based Management

-Firmware upgrade via FTP

-Customizable Web pages

Page 6
Image 6
Lantronix A104 manual