Gather the information as illustrated in the following table and keep it for
reference.
VPI/VCI, Service Name, Username, Pass word, and Domain Name System
(DNS) IP address (it can be au tomatically assigned from ISP or be s etf ixed)
VPI/VCI, Service Name, Username, Pass word, and Domain Name System
(DNS) IP address (it can be au tomatically assigned from ISP or be s etf ixed)
VPI/VCI, Service Name, Username, Pass word, and Domain Name System
(DNS) IP address (it can be au tomatically assigned from ISP or be s etf ixed)
VPI/VCI, Username, Password, and Domain Name System (DNS) IP
address (it can b e automatically a ssigned from ISP or be set fixed ).
VPI/VCI, Username, Password, and Domain Name System (DNS) IP
address (it can b e automatically a ssigned from ISP or be set fixed ).
VPI/VCI
VPI/VCI
VPI/VCI, IP address, Sub net mask, Gateway addre ss,a nd Domain Name
System (DNS) IP a ddress (it is fix ed IP address).
VPI/VCI, IP address, Sub net mask, Gateway addre ss,a nd Domain Name
System (DNS) IP a ddress (it is fix ed IP address).
VPI/VCI, IP address, Sub net mask, Gateway addre ss,a nd Domain Name
System (DNS) IP a ddress (it is fix ed IP address).
Unlike a simple hub or switch, t he setup of the ADSL Router consists of more
than simply pluggingeverything together. Because the Router acts asa
DHCP server, you will have t o set some values within the Router, and al so
configure your networked PCs to accept the IP Addresses the Router chooses
to assign them. Generally there are several different operating modes for your
applications. And you can know which mode is necessary for your system
from ISP. These modes are router, bridge, PPPoE+NAT and NAT and
PPPoA+NAT. Actually all these are for IP address of WAN.
If your ISP provides RFC1483 R outedmode, it means the IP address
of LAN will be routed via WAN. You should set the "Router" mode in
the ADSL router for this situ ation,al so set the IP address / netmask of