Lathem 2121 - page 10

Model 2121 Time Recorder User’s Guide

Page 8

7.2 While holding the type section up, release the latch by

slightly pushing it in the direction, as shown below.

7.3 Gently lower the type section.

Tip: Turn spools to tighten ribbon before lowering type

section to avoid catching the ribbon.

7.4 Firmly push it into the clock until it clicks.

7.5 Plug the clock into an AC electrical outlet.

Contents

Main Contents Ordering Accessories Start Here 1. Mount Clock in Suitable Location 2. Unlock and Remove the Cover 3. Lift the Type Section 4. Set the Printed Day and Time Page 5. Set Hands on Clock Face 6. Advance Print Wheels and Hands 7. Lower the Type Section into Place Page Page Change the Ribbon Change the Type Section Change the Motor 9. Attach the type section, reset the time, and replace the cover, as described in this guide. Trouble Shooting Model 2121 Time Recorder Users Guide Page 14 Warranty Printed in USA P/N: USG0088