Lathem 2121 6. Advance Print Wheels and Hands , 7. Lower the Type Section into Place

1 16

Model 2121 Time Recorder User’s Guide

Page 7

6. Advance Print Wheels and Hands

6.1 Turn the main setting wheel, as shown below, to advance

both the clock face and the print wheels together.

6.2 Use your fingers or a pointed object to rotate the main

setting wheel clockwise until it advances the time on the

clock face to the current time. Each minute will make a

distinct click as you rotate the wheel.

Tip: Advance print wheels and clock face 1 or 2 minutes

ahead of the actual time to allow time to complete step 7.

7. Lower the Type Section into Place

7.1 Slightly lift the type section.

Contents

Main Contents Ordering Accessories Start Here 1. Mount Clock in Suitable Location 2. Unlock and Remove the Cover 3. Lift the Type Section 4. Set the Printed Day and Time Page 5. Set Hands on Clock Face 6. Advance Print Wheels and Hands 7. Lower the Type Section into Place Page Page Change the Ribbon Change the Type Section Change the Motor 9. Attach the type section, reset the time, and replace the cover, as described in this guide. Trouble Shooting Model 2121 Time Recorder Users Guide Page 14 Warranty Printed in USA P/N: USG0088