Lathem 2121 4. Set the Printed Day and Time

Model 2121 Time Recorder User’s Guide

Page 4

3.2 While pushing the lock lever down, lift the entire type

section as shown below until it locks into place

horizontally. It will click distinctly when it locks place.

4. Set the Printed Day and Time

4.1 Locate and press the red overthrow lever until it clicks.

This releases the print wheels, allowing you to turn them.

Contents

Main Contents Ordering Accessories Start Here 1. Mount Clock in Suitable Location 2. Unlock and Remove the Cover 3. Lift the Type Section 4. Set the Printed Day and Time Page 5. Set Hands on Clock Face 6. Advance Print Wheels and Hands 7. Lower the Type Section into Place Page Page Change the Ribbon Change the Type Section Change the Motor 9. Attach the type section, reset the time, and replace the cover, as described in this guide. Trouble Shooting Model 2121 Time Recorder Users Guide Page 14 Warranty Printed in USA P/N: USG0088