Wall Mounting, Replacing Ribbon Cassette | Lathem 5000E manual

WALL MOUNTING

Step1

Four screws

•Leave screw heads about 1/8" from wall.

Step3

• Put on the top case.

Step2

• Remove the top case and hang on the wall.

• Select wall area near AC outlet.

•Mount the Time Recorder on wood or a surface which can support weight (dry wall will not support unit).

REPLACING RIBBON CASSETTE

1. Carefully slide the exposed ribbon under the print head.

2. Push cassette with the projection into the ribbon cassette holder until snapped into place.

3. Turn the ribbon feed knob clockwise until the ribbon is taut.

Ribbon cassette holder

Projection

18

Image 20

Lathem 5000E manual Wall Mounting, Replacing Ribbon Cassette

Contents

Lathem Time Corporation Lathem Time Corporation Features Before Using Your Time Clock Attached Accessories Print Position on Time Card ConfigurationLocation of Name Quick Easy Setup Step HOW to Program the Clock DIPSW1 DIPSW2 Setting the Time Example Setting the Date Setting the Starting Daylight Saving Time Setting the Ending Daylight Saving Time Number Repeat Times SET Setting the NumberInitial Number SET Number Reset Preprogramed Comments Setting Press the SW2 key until the correct number appears Setting the Password Registering the Password HOW to Change Settings When Password is SET Canceling the Password Print Method Setting Print Switch Type of AN HourLeft or Right Print Leading Number of Year Digits Type of Language Wall Mounting Replacing Ribbon Cassette DIP Switch Setting DIPSW1 DIPSW2 Print example Specifications Main Function