ATX6 Installation and User Guide
If mounting near a ceiling, make sure the top holes are at least 2” away from the ceiling.
If an external amplifier will be used, mount the ATX6 within 6 feet of its location.
»After deciding the location where the clock will be mounted, use the enclosed template to make the three marks for the mounting screws.
»Drill a 5/16" hole at each of the marks
»Insert a wall anchor in each hole and tap it flush to the wall with the hammer.
»Insert a screw into the top two wall anchors leaving 1/8" exposed.
»Line up the two keyholes on the back of the case and slip over the two screws.
»The lower mounting screw can now be inserted into the wall anchor and secured.
Page 4
