Preparing the charger (C)
The charger must be equipped with the right plug (1.40) for the local power outlets.
To attach the plug,
The appropriate plug type is pushed onto the charger until it clicks into place.
Inserting the battery into the charger
1.Connect the charger to a power outlet.
2.Insert the battery into the charger by
a.positioning it with its contacts face down and pointing at the counterparts (1.38a) in the battery bay, and
b.pushing it down until it lies flat in the bay.
1.401.41
To remove a plug, simultaneously
a.press the locking button (1.41) and
b.pull the attached plug off upwards from its normal position.
Note:
The charger automatically switches to the prevailing mains voltage.
1.39
1.38a
Charge status indications
Correct loading is indicated by the status LED (1.39) glowing red, when it turns green the battery is completely charged.
99
