GB
key). The distance measuring key is active in both levels. The functionality of the direction keys depends on the software used.
Transmitting the measurement
If your software supports the direction keys use them to select the appro- priate position for the cursor.
)The free software supplied is designed to provide the user with basic functionality. Leica Geosystems provides no warranty for this free software and offers no support for it. Leica Geosystems accepts no liability whatsoever arising from the use of the free software and is not obliged to provide corrections nor to develop updates or upgrades.
You can find numerous commercial vendors of software for a wide range of applications on our homepage.
Press the |
| button briefly to transfer the value from the summary row |
| Appendix |
|
|
|
|
| ||
to the pocket PC / PC. |
|
|
| ||
For further details please consult your manual for the software used. |
| Message codes |
| ||
|
|
|
| All message codes are displayed with either | or "Error". The following |
Selecting particular values in the display |
| errors can be corrected: |
| ||
The display shows a number of measurements (min., max., last measu- |
|
|
|
| |||||||||||||||
rement taken). By pressing and holding the |
|
| button you can select all |
|
| Cause | Remedy | ||||||||||||
|
|
| |||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 156 | Transverse tilt greater than 10° | Hold the instrument without | |
measurements in the display for transmitting (blue lines under the measu- | |||||||||||||||||||
|
|
| any transverse tilt | ||||||||||||||||
rements). When you press the |
| - key or the |
|
|
|
| - key you can select |
|
|
| |||||||||
|
|
|
|
|
| 162 | The calibration has not been | Calibrate the device on an abso- | |||||||||||
one specific value. Once selected the measurement can be transmitted |
|
| accomplished on a levelled | lute horizontal levelled surface. | |||||||||||||||
using the |
| - key. The same selection process can be used for areas, |
|
| surface and the calibration value |
| |||||||||||||
|
|
| is respecitvely within an |
| |||||||||||||||
volumes, indirect measurements and room dimensions. |
|
| ineligible area. |
| |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 204 | Calculation error | Repeat procedure | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 240 | Data transfer error | Repeat procedure | |
During data transmission |
|
|
|
|
|
| |||||||||||||
|
|
|
|
|
|
| 245 | 2nd button pressed although no | Establish Bluetooth connection | ||||||||||
If the data is not confirmed as being successfully received by the Pocket PC/ |
|
| Bluetooth connection exists. |
| |||||||||||||||
PC then no new measurement can be processed. The Info code "240" |
| 252 | Temperature too high | Cool down instrument | |||||||||||||||
| 253 | Temperature too low | Warm up instrument | ||||||||||||||||
appears in the display if no data transmission has taken place after 2 |
| ||||||||||||||||||
| 255 | Receiver signal too weak, | Use target plate | ||||||||||||||||
seconds. Press the |
| - key and repeat the measurement and then |
| ||||||||||||||||
|
|
| measurement time too long, |
| |||||||||||||||
transmit it. |
|
|
|
|
|
|
|
|
|
|
|
|
|
| distance > 100 m |
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||
|
|
|
|
|
|
|
|
|
|
|
|
| 256 | Received signal too strong | Target too reflective (use target | ||||
) If Bluetooth transmission is limited, the PC may have Bluetooth |
| ||||||||||||||||||
| 257 |
| plate) | ||||||||||||||||
hardware with a shorter range. In this case we recommend the usage of an |
|
| Wrong measurement, | Darken target (measure in diffe- | |||||||||||||||
external Bluetooth USB adapter of class 2. |
|
|
|
|
|
|
|
| background brightness too high | rent lighting conditions) | |||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 260 | Laser beam interrupted | Repeat measurement | |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
Appendix |
|
|
|
|
|
|
|
|
|
|
|
| 16 |
| Leica DISTO™ D8 LCA782205a gb | ||||
