Leica dm750 p manual Information for the person responsible for the instrument

Information for the person responsible for the instrument

Information for the person responsible for the instrument

ϘϘ Ensure that the Leica DM750 P microscope is used only by qualified personnel.

ϘϘ Ensure that this user manual is always avail- able at the Leica DM750 P microscope.

ϘϘ Carry out regular inspections to make certain that the authorized users are adher- ing to safety requirements.

ϘϘ When instructing new users, do so thor- oughly and explain the meanings of the warning signs and messages.

ϘϘ Assign individual responsibilities for start- ing, operating and servicing the instru- ment and monitor the observance of these responsibilities.

ϘϘ Do not use the Leica DM750 P microscope unless it is in perfect condition.

ϘϘ Inform your Leica representative or Leica Microsystems (Schweiz) AG, Industry ­Division, 9435 Heerbrugg, Switzerland, immediately of any product defect that could potentially cause injury or harm.

ϘϘ If you use accessories made by third-party manufacturers with the Leica DM750 P microscope, be sure that each such manu- facturer confirms the safety-engineering, harmless usability of the product and observe the product's user manual.

ϘϘ Modifications and maintenance of the Leica DM750 P microscope may only be performed by professionals expressly authorized by Leica.

ϘϘ Only original Leica replacement parts may be used in servicing the product.

ϘϘ After service work or technical modifica- tions, the unit must be reconfigured with observance to our technical requirements.

ϘϘ If the unit is modified or serviced by unau- thorized persons, is improperly maintained (as long as maintenance was not carried out by us), or is handled improperly, Leica will not accept any liability.

ϘϘ The electric installation in the building must conform to the national standard, e.g. current-operated ground leakage protec- tion (fault-current protection) is suggested.

Leica DM750 P Manual 11