Leica dm750 p manual Substage Condenser cont

Substage Condenser (cont.)

4.Completely loosen the two thumbscrews on the condenser mount.

5.Slide the substage condenser into the fork mount located underneath the stage by aligning the positioning pin on the condenser into the slot on the back of the fork.

6.Raise the condenser to its highest position using the condenser focus on the left-hand side of the substage

7.Tighten the thumbscrews to roughly center the substage condenser so that the top lens of the condenser is centered beneath the objective in use. You will more accurately center and focus the condenser when you reach section Koehler Setup.

Leica DM750 P Manual 23