Leica dm750 p manual Basic setup, Work Surface, Power

Basic setup

As a safety precaution, the power cord has been grounded to the microscope base. Never use an adapter between the power

cord and the power source; it will render the grounding feature ineffective.

Work Surface

•Always use your microscope on a hard, stable surface.

Power

1.If the power cord is not already attached, attach it securely to the back of the micro- scope.

2. Plug the	microscope	power cord into
a suitable	grounded	electrical outlet.

A grounded 3-wire cord is provided.

3.Set the illumination control (knob is located on the bottom left-hand side of the micro- scope stand) to the lowest setting to start. The illumination control knob allows you to adjust the intensity of light produced by the illumination system.

4.Turn on the microscope using the switch on the bottom right-hand side of the micro- scope stand.

Leica DM750 P Manual 25