Tools used | Leica dm750 p guide

Attaching Analyzer Module or Analyzer/Bertrand Lens Module

Tools used

ϘϘ Allen key

1.Slightly unscrew the set screw located on top of the stand with the Allen key tool provided.

2.Align the shape of the module with the shape of the microscope stand.

3.Insert the dovetail of the module into the stand. (Analyzer/Bertrand Lens Module shown).

4.Tighten the set screw to lock the module into place.

Leica DM750 P	Manual	19

Image 19

Leica dm750 p manual Attaching Analyzer Module or Analyzer/Bertrand Lens Module, Tools used

Contents

Leica DM750 P Manual Chapter overview Contents Safety regulations Safety concept Provide clarity Symbols used in this operating manualLight bulbs Important information EC Declaration of Conformity Important NotesDescription Contact address Non-intended use Instructions on useIntended use Place of use Integration in third-party products To any warranty claimsTransport Disposal Vidual or detachable eyecups Health risks and dangers of useHealth risks Viral infections of the eye Information for the person responsible for the instrument Information for the person responsible for the instrument General instructions Cleaning coated parts and plastic partsCleaning glass surfaces Care instructions Repairs and service work Accessories, maintenance and repairAccessories Maintenance Environment Fuse ReplacementElectrical data Input 100-240 V, 50/60 Hz, 5 W 3 W LED Leica DM750 P Introduction Unpacking Check the components against the planned configuration Get Ready Tools used Attaching Analyzer Module or Analyzer/Bertrand Lens Module Viewing Tube Installing Objectives Substage Condenser Substage Condenser Completely loosen the two thumbscrews on the condenser mount Get Set Power Basic setupWork Surface Objective Using the Aperture Condenser Substage condenser in a swing in/out Setting up Polarized LightPolarizer Analyzer into position Focusing Focusing Slightly, if at all Viewing Tube AdjustmentSlot of the right eyetube Eyepiece. Do not raise or lower the stage to focus Koehler Set up Koehler Set up ϘϘ Centering keys Objective CentrationFocus the polarizing sample Modules Image through the eyepieces Bertrand Lens OperationYou can now view the conoscopic image through the eyepieces Changing the status of the time delay shutoff Time Delay ShutoffOr Disabled and you will not see any blinking Leica DM750 P Manual Ready! Set! Go Care of the Microscope This purpose For two compensators in the rear General maintenanceGeneral Hands. There is a handle on the back Is extended Around the lens Lint-free cloth, lens tissue or cotton swabϘϘ It is very important to avoid the excessive Should be moistened with solvent, but Mechanical Maintenance Mechanical Maintenance Dimensions Leica DM750 P Manual Leica DM750 P Manual Leica DM750 P Manual