Lenco Marine PL 4201 operating instructions Troubleshooting table / Specifications

Troubleshooting table / Specifications

Troubleshooting table

Please check the following items, before you request for service.

	Symptom		Possible solution	Page
No picture, no sound			Switch on the set.	10
			Check the 230 V wall outlet.
			Press 0/AV repeatedly until the desired operating status	29, 35
			appears.
No reception			Preset the station without using the scartcable.
			Press 1 on the remote control.
			Connect the antenna.	10
			Check your antenna.	10
The TV switches off with			This is normal.	17
missing antenna input signal			15 minutes after the antenna signal has disappeared,
			the set will change to standby.
In	menu, TUNING-line		The unit is set to AV mode. Press 1 on the remote	13
can not be selected.			control.
Specifications
System:		PAL B/G, D/K, I/I, SECAM L Color System
Frequency Range:		PAL: 2-12, X, Y, Z, S1-S41, 21-69
		SECAM: FB-FC, F1-F6, B-Q, 21-69
Power Supply:		AC 230V, 50Hz
Power Consumption:		Operation: approx. 250W
		Stand by: approx. 2W
PDP:		41.58" TYPE (105.6 cm visible)
		852 x 480 Pixel
HDMI input:		HDMI compliant (type A connector)
		HDCP compliant
		Suggested scan rates:
			PAL: 576i/576p/720p/1080i
			NTSC: 480i/480p/720p/1080i
		HDMI Audio: 2-channel PCM
			32/44.1/48 kHz sampling frequency
			16/20/24 bits per sample
PC-Connection:		1280x720@60Hz / 1280x768@60Hz (according to Graphic card)
Output Power:		10W x 2 (MAX)
Surrounding temperature:		Operation: 5°C ~ 40°C
		Storage: –20°C ~ 60°C
Operating Humidity:		Less than 80%RH
Dimensions:		121(W) x 71.7(H) x 34(D) cm
Weight:		approx. 39 kg (w/o Accessories)
Accessories:		2 batteries (AAA/R03/UM-4)
		Remote control unit
		AC cord
		HDMI-DVI Cable

Weight and dimensions are approximate. Because we continually strive to improve our products we may change specifications and designs without prior notice.

38

3U84011A [E] P35-BACK 38 20/12/05, 15:22