Scrolling the CINEMA-wide picture, Or Full

Scrolling the CINEMA-Wide picture/Auto 4:3 Default

Scrolling the CINEMA-wide picture

During the CINEMA-wide mode you can adjust the vertical picture position.

Note:

You cannot move the picture vertically in other wide mode.
1 Select
VERTICAL
POSITION.	.
Then press

: SELECT : ADJUST

MENU : RETURN

2 Press the picture.

•To raise the picture, press .

•To lower the

picture, press

or to adjust the vertical position of




		: ADJUST
		ENTER : SET





		: ADJUST
		ENTER : SET

3 Press MENU repeatedly until the MENU disappears.

Auto 4:3 Default

In case AUTO mode is selected for wide mode and any
picture-width signal is not received, you can preset beforehand
either “4:3” or “Full screen”.
1 Select AUTO 4:3
ThenDEFAULT.Press	or
to select 4:3

or FULL.
: SELECT	: ADJUST

MENU : RETURN

2 Press MENU

repeatedly until the MENU disappears.

3U84011A [E] P26-34

20/12/05, 15:22

Page 26

Image 26

Lenco Marine PL 4201 Scrolling the CINEMA-Wide picture/Auto 43 Default, Scrolling the CINEMA-wide picture, Or Full

Contents

Plasma Colour Television Power save notice FeaturesBattery notice Headphone-Warning Contents Important notice, Installation Safety note Important notice, Installation Moving the unit or carrying by hand If not, eyes will strain Left Side Front Side Description of Indicators and ControlsLocation of controls Remote sensor Loudspeakers Remote Control Distance of Remote Control Operation Remote ControlInstall the batteries Antenna connection Hdmi input See PC Monitor input PC See Preparation Call Menu and for example Select Auto TuningQuick guide for MENU-operation Select Language Then press On-screen Language SelectionTeletext Language Selection Select Text Language Then press To select West or East Press Automatic station presetting with the built-in TunerSystem Change the order of stored channel Manual TV station presetting Press To select PAL or SECAM-L Then press Enter Scart-cable not supplied Connection to Satellite ReceiverPlasma television Basic Operation Channel selection Timer functions Select Nicam Press Stereo reception with the built-in tunerNicam stereo sound reception Select OFF if you want no NICAM-reception Stereo reception with the built-in tuner Select BASS. Then press or to adjust the bass Bass, Treble and Balance Turning off the built-in speakers Selecting the BBE/Turning off the built-in speakersSelecting the BBE Select BRIGHTNESS. Then press Brightness, Contrast, Colour and Sharpness/DNRBrightness, Contrast, Colour and Sharpness Select DNR. Then press Mode Picture Quality Selecting the color temperature/Blue backSelecting the color temperature Blue back 169 Manual format settingPicture format 149 Scrolling the CINEMA-wide picture Scrolling the CINEMA-Wide picture/Auto 43 DefaultAuto 43 Default Or Full Screen Saver Full White/Screen Saver/Static ImageFull White Static Image To unlock the panel Using the panel lock featureTo change password PC-Setting Select PC input Picture Menu Brightness and Contrast can be set as you PC-SettingPress To select CONTRAST. Then Audio Menu Selecting the Hdmi audio input source Connecting an Hdmi or a DVI device to the Hdmi inputHdmi cable type a connector Not supplied Supplied TOPtext Switch on / off TeletextTeletext Select Teletext Cancel Concealment of Channels Conceal stored channels DVD player Connect with various unit Connection to other equipment Connecting an audio systemSetting of Scart socket AV2 Connect to a Video camera or Video player Press Menu, select AV Colour AV-Color adjustingConnect with another equipment See pages 35 Specifications Troubleshooting table / SpecificationsTroubleshooting table 3U84011A E P35-BACK 20/12/05 J3U84011A SH 06/02

Lenco Marine PL 4201 Scrolling the CINEMA-Wide picture/Auto 43 Default, Or Full

Models: PL 4201

Scrolling the CINEMA-Wide picture/Auto 4:3 Default

Scrolling the CINEMA-wide picture

VERTICAL

POSITION.

3 Press MENU repeatedly until the MENU disappears.

Auto 4:3 Default

or FULL.

2 Press MENU