Dual In-Line Memory Module (DIMM) 221
3Using a screwdriver, loosen the
seven screws. (Do not remove
them from the printer.)
4Slide the panel slightly to the
right and lift it off the printer.
5Insert the new DIMM straight
into the DIMM connector until
the latches snap into the locked
position.
Observe the keyed side of the
DIMM to align it with the connec-
tor. If you cannot snap the DIMM
into place, do not force it. Repo-
sition it, making sure that the
DIMM is seated completely in
the connector.
6Reinstall the panel and tighten the seven screws.
7Attach the rear cover.
8Reconnect all interface cables.