Door Trim Installation Instructions
Parts List (A):
Qty
(2)Trim Pieces (Gold, Nickel, Brushed Nickel or Black Nickel )
(6) #10 nuts
(6) #10 washers
Tools Needed:
Qty
(1) 3/8” nut driver or socket wrench
CAUTION: Always ensure that plated surfaces are clean and free of fingerprints before lighting stove. Fingerprints will leave permanent blemishes if left on plated surface when lit. When installation is complete, the trim should be gently cleaned with soft cloth and either alcohol or glass cleaner. Do not overtighten nuts, overtightening can create visible dimples on the plated surface.
To install Door Trim:
1.Remove the trim pieces and hardware from its packaging and ensure that all pieces are present before beginning installation. Take care not to scratch finished surfaces.
2.Open right and left side door. The side doors swivel open towards the back of the stove. See Figure 24.
3.Open front door. Put trim in place by inserting trim studs into the corresponding holes in the door (Figures 22 & 25). The top piece of trim will only fit in one direction, but the bottom piece can be installed incorrectly. When placing the bottom piece of trim, make sure there is a 9/16” gap between the top of the trim piece and the glass in the door. (Figure 26)
Pellet Stove Door
Trim Pieces
Figure 22
NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.
(A)
Trim Pieces
Trim Screws
#10 washers
Figure 23
Holes for trim studs
|
| Door Handle |
Figure 24 |
| |
|
| |
|
|
|
|
|
Figure 25 |
| Trim stud | |
|
|
|
Top of Trim
Figure 26
11