Door Grill Installation Instructions

Parts Needed:

Qty

(4) Button Head Screws (already in place in stove)

Tools Required:

Qty

(1) 1/8” allen wrench

To install the Grill:

1.Remove the four button head screws from body of the stove with a 1/8” allen wrench. See Figure 29.

Button Head Screw

Figure 29

2.Pull the scraper rod out, rotate the grill vertically, (with the notch to the left) and slide the grill over the scraper rod (slide the rod between the third and fourth bar). See Figure 30.

Notch

Slider Rod

Between 3rd & 4th Bar

3.Rotate the grill back to the horizontal position and re-install the four button head screws through the two holes at each end of the grill and into the stove body. See Figure 31.

Rotate Grill Back To Horizontal Position

Figure 31

Re-install Button Head Screws

Figure 32

Figure 30

NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE.

13