Log Set installation Instructions
Kit Contents (A):
Part #H5142
Qty
(1) left log (B)
(1) right log (C)
(1) front log (D)
(2) log support brackets (E)
A - Kit Contents
cut lines 
BC
Figure 39
D
bracket in place correctly
EE
Figure 38 |
|
|
Tools Required: | Figure 40 |
|
|
| |
None |
|
|
Caution: The logs can be damaged if they are not handled | B | C |
with care! |
|
|
To Install the log set: |
|
|
1. Remove the two log support brackets from the box and |
|
|
bend the ends of the brackets 90 degrees at the cut lines. |
|
|
See Figure 39. |
| D |
2. One bracket goes into the left corner and the other into |
|
|
the right corner of the firebox. Rotate the brackets so | Figure 41 |
|
they are placed as shown in Figure 40. The bracket fits |
| |
|
| |
between the back of the firebox and the air wash at the |
|
|
front of the stove. |
|
|
3.Remove the ceramic logs from the box and carefully unwrap them. Position each back log (Figure 41, B, C) in their proper place, one on each side against the back of the firebox.
4.The front log should face the front of the firebox with the woodgrain showing. It should rest on the other two back logs. See Figure 41 for assembled log set.
16 | NOTE: DIAGRAMS & ILLUSTRATIONS ARE NOT TO SCALE. |