CONGRATULATIONS!

In selecting this LENNOX B-Vent Gas Appliance you have chosen the finest and most dependable fireplace to be found anywhere. Its a beautiful, prestigious alternative to a wood burning fireplace. Welcome to a Family of tens of thousands of satisfied LENNOX Fireplace Owners.

Please carefully read and follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The Homeowner's Care and Operation Instructions included here will assure that you have many years of dependable and enjoyable service from your LENNOX product.

Input (BTU) Manually-Modulated Gas Valves (millivolt models)

Models

Fuel

Input Rate

 

Type

(BTU / HR)

 

 

 

MPB35ST-NM

Nat. Gas

30,000 high

23,000 low

 

 

 

 

 

MPB35ST-PM

Propane

28,000 high

22,000 low

 

 

Table 1

Electronic Models -

TABLE OF CONTENTS

 

 

Introduction

page

2

General Information

page

2

Gas Controls/Control Compartment,

 

 

Access

page

4

Operation/Care of Your Appliance

page

4

Variable Flame Adjustment

page

5

Venting Action and (spill switch)

page

5

Outside Combustion Air Control

page

6

Maintenance

page

6

Front Glass Enclosure Panel,

 

 

Removal and Installation

page

7

Logs, Vermiculite & Ember Placement

page

8

Burner Adjustments

page 10

Maintenance Schedule

page 11

Troubleshooting Guide – Millivolt

page 12

Troubleshooting Guide – Electronic ...

page 12

Millivolt Appliance Checkout

page 14

Electronic Appliance Checkout

page 14

Wiring Diagrams

page 14

Warranty

page 14

Product Reference Information

page 14

Accessory Components

page 15

Lighting Instructions – Millivolt

page 18

Lighting Instructions – Electronic

page 19

Replacement Parts List

page 20

INTRODUCTION

The millivolt appliances have a millivolt gas control valve witha piezo ignition system which provides safe, efficient operation.

The electronic appliances have an electronic intermittent pilot system provides safe, efficient operation. External electrical power is required to operate these units.

LISTING AS FOLLOWS:

These appliances comply with National Safety Standards and are tested and listed by Omni- Test Laboratories (Report No. 116-F-27-5) to ANSI Z21.50 - 2000 (in Canada, CSA 2.22

-2000), and CAN/CGA-2.17-M91 in both USA and Canada, as vented gas fireplaces.

Installation must conform to local codes. In the absence of local codes, installation must comply with the current National Fuel Gas Code, ANSI Z223.1 (NFPA 54). (In Canada, the current CAN/CGA B149 installation code.) Electrical wiring must comply with local codes. In the absence of local codes, installation must be in accordance with the National Electrical Code, NFPA 70 - (latest edition). (In Canada, the current CSA C22.1 Canadian Electric Code.)

GENERAL INFORMATION

Note: Installation and repair should be per- formed by a qualified service person. The appliance should be inspected annually by a qualified professional service technician. More frequent inspections and cleanings may be required due to excessive lint from carpeting, bedding material, etc.

IMPORTANT

It is imperative that the control compartment, burners and circulating air passage ways of the appliance be kept clean. See Maintenance instructions on Pagex 6.

Provide adequate clearances around air open- ings and adequate accessibility clearance for service and proper operation. Never obstruct the front openings of the appliance.

Due to high temperatures the appliance should be located out of traffic and away from furniture and draperies. Locate furniture and window coverings accordingly.

These appliances are designed to operate on natural or propane gas only. The use of other fuels or combination of fuels will degrade the performance of this system and may be dangerous.

Millivolt Models - BTU Input

Millivolt models come standard with the manu- ally-modulated gas valve; flame appearance and heat output can be controlled at the gas valve. Input of for these models is shown in the fol- lowing table:

Electronic models have a fixed rate gas valve. Input of electronic models is shown in the following table:

Input (BTU) - Fixed Rate

(electronic models)

Models

Fuel

Input Rate

 

Type

(BTU / HR)

MPB35ST-NE

Nat. Gas

30,000

 

 

 

MPB35ST-PE

Pro. Gas

28,000

(if field converted)

 

 

Table 2

Gas Pressure -

Tables 3, 4 and 5 show the appliances' gas pressure requirements.

Inlet Gas Supply Pressure

(all models)

Fuel #

 

 

Minimum

Maximum

 

 

 

 

 

 

 

Natural Gas

 

5.0" WC

10.5" WC

 

(1.24 kPa)

(2.61 kPa)

 

 

 

 

 

 

 

 

 

 

Propane

 

 

11.0" WC

13.0" WC

 

 

(2.74 kPa)

(3.23 kPa)

 

 

 

Table 3

 

 

 

 

 

 

 

 

 

Manifold Gas Supply Pressure

 

 

(millivolt models)

 

 

 

 

 

 

Fuel #

 

 

Low

 

High

 

 

 

 

Natural

(Lo) 2.2" WC

 

(Hi) 3.5" WC

Gas

 

 

(.55 kPa)

 

(.87 kPa)

 

 

 

 

Propane

(Lo) 6.3" WC

 

(Hi) 10.0" WC

 

(1.57 kPa)

 

(2.49 kPa)

 

 

 

Table 4

 

 

 

 

 

 

 

 

 

 

 

 

 

Manifold Gas Supply Pressure

 

(electronic models)

Fuel #

 

 

Fixed

 

 

 

 

 

 

 

Natural Gas

 

 

3.5" WC

 

 

(.87 kPa)

 

 

 

 

 

 

Propane

 

 

10.0" WC

 

 

(2.49 kPa)

 

 

 

 

 

 

 

 

 

 

 

 

 

Table 5

 

 

 

 

 

 

2

NOTE: DIAGRAMS & ILLUSTRATIONS NOT TO SCALE.

Page 2
Image 2
Lennox International Inc MPB35ST-NM manual Congratulations

MPB35ST-NM specifications

Lennox International Inc., a leader in the heating, ventilation, and air conditioning (HVAC) industry, offers the MPB35ST-NM model as part of its comprehensive range of integrated solutions. This finely engineered unit is designed to provide exceptional performance and energy efficiency while ensuring optimum home comfort.

One of the standout features of the Lennox MPB35ST-NM is its modular design, which allows for flexible installation and easy integration with existing systems. This unit is particularly beneficial for residential settings where space may be at a premium. It also supports efficient zoning, enabling tailored climate control for different areas of the home.

The MPB35ST-NM utilizes advanced multi-stage heating technology, which means it can adjust its output to match the specific demands of the environment. This significantly enhances energy efficiency and reduces operational costs. The unit operates with a high Seasonal Energy Efficiency Ratio (SEER) rating, ensuring optimal performance without excessive energy consumption.

Additionally, the MPB35ST-NM is equipped with smart technology features that allow homeowners to monitor and manage their heating system remotely. Through a user-friendly app, users can adjust settings, schedule maintenance reminders, and receive performance alerts, all of which contribute to an improved user experience.

Another key characteristic of the MPB35ST-NM is its quiet operation. The unit is designed with sound-dampening components that minimize noise during operation, ensuring that homeowners can enjoy a peaceful living environment.

Durability is another hallmark of Lennox products, and the MPB35ST-NM is no exception. Constructed with high-quality materials, this unit is built to withstand the rigors of daily use while offering long-lasting reliability. Additionally, Lennox provides robust customer support and warranty options, giving customers peace of mind in their investment.

In summary, the Lennox International Inc. MPB35ST-NM model stands out as a leader in home heating solutions. With its adaptable design, energy-efficient technology, smart features, quiet operation, and dependable durability, it meets the evolving needs of modern households, making it an excellent choice for those seeking comfort and efficiency in their heating systems.