Table28. Removal steps of wireless LAN antenna assembly, wireless WAN antenna
assembly,and LCD rear cover assembly (continued)
3
3
3
3
3
3
Cable routing: When you install the antenna assembly, route the cables as
shown in the figures below.As you route the cables, make sure that they are not
subjected to any tension. Tensioncould cause the cables to be damaged by the
cable guides, or a wire to be broken.
a: Wireless LAN MAIN antenna (gray)
b: Wireless WANMAIN antenna (red)
c: Wireless WANAUX antenna (blue)
d: Wireless LANAUX antenna (black)
a b c d
Removing and replacing a FRU 113