Lenovo 3000 C200 manual Removing and replacing a FRU, To remove the MDC, do as follows

Removing and replacing a FRU

To remove the MDC, do as follows:

2

Step	Screw (quantity)	Color	Torque
	M2.5 × 3 mm, flat-head, nylon-coated (2)	Black	0.392 Nm
			(4 kgfcm)

When installing: Make sure that the connector is attached to the system board firmly, and then fasten the screws.

To remove the PC Card slot assembly, do as follows:

2

Step	Screw (quantity)	Color	Torque
	M2 × 4 mm, flat-head, nylon-coated (4)	Silver	0.245 Nm
			(2.5 kgfcm)

When installing: Make sure that the connectors of PC Card slot assembly is attached to the system board firmly, and then fasten the screws.

72MT 8922